Ammonium Sulfate SDS of Manufacturers

Anmol Chemicals is the pioneer manufacturers of Ammonium Sulfate or Ammonium Sulphate, Pharmaceutical Excipients Chemicals in India. We offer Halal and Kosher Ammonium Sulfate or Ammonium Sulphate made in an ISO9001, ISO22000 (FSSC22000) and cGMP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, Africa, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Ammonium Sulfate or Ammonium Sulphate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

Ammonium Sulfate SDS of Manufacturers Exporters

Product Name & Other Names: Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate.
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1
Molecular Formula: (NH4)2SO4
Molecular Weight: 132,14 g/mol
Relevant uses and uses advised against (if any): Industrial use only.

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Hazard not otherwise classified:
H320 May causes mild eye irritation.
H402: May be a little harmful to aquatic life.

Precautionary statements:
P262: Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P314: Get Medical advice/attention if you feel unwell.
P301+P312: IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P330: Rinse mouth.
P360: Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.
P501 Dispose of contents/ container to an approved waste disposal plant.

Product Name & Other Names: Ammonium Sulphate or Ammonium Sulfate or Diammonium Sulfate.
CAS Number: 7783-20-2
EINECS EC Number: 231-984-1

Skin: Wash promptly with soap and water and flush with water until chemical is removed. Remove any contaminated clothing and wash before reuse. Get medical attention for irritation.
Eyes: Flush promptly with plenty of water for at least 15 minutes. Get medical attention.
Inhalation: Remove to fresh air. If breathing is difficult, give oxygen if a qualified operator is available. Get medical attention for irritation or discomfort.
Ingestion: If conscious drink 2 to 4 glasses of water and induce vomiting by touching back of throat with finger.

Flash Point: Not applicable
Auto-ignition Temperature: Not applicable
Extinguishing Media: ;Any standard agent may be used. If involved in a fire, flood with water.
Unusual Fire and Explosion Hazards: Ammonium Sulfate decomposes at elevated temperatures to produce toxic fumes of ammonia and sulfur oxides. If mixed with strong oxidizers such as ammonium nitrate or potassium salts (nitrite, nitrate, or chlorate), a vigorous reaction may occur. Special Fire Fighting Precaution: Since toxic gases may be released violently at high temperatures, firefighters should wear full protective clothing and NIOSH approved, self contained breathing apparatus. Use water to keep fire exposed containers cool. Do not let the product enter drain.

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Flush residue with water if permitted by applicable disposal regulations.

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents, strong acids & bases. Avoid Sources of ignition. Direct sunlight.

Exposure Limits: No occupational have been established for this product. Keep it at <10mg/m3
Engineering Controls: Provide local exhaust, if dusty conditions prevail.
Personal Protective Equipment
Skin Protection: To minimize skin contact, wear long sleeved shirt, trousers and gloves for routine product handling and use.
Eye Protection: Under dusty or misty conditions, wear chemical safety goggles. Do not wear contact lenses.
Respiratory Protection: Where dusty or misty conditions require it, use a NIOSH approved dust or mist respirator for needed protection.

Appearance: Colorless to off-white crystals or granules.
Odor: Odorless
Odor threshold: Not available.
pH: 5-6 at 5% water solution.
Relative density: around 1.77
Boiling Point: > 280 °C (536 °F)
Melting Point :NA
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility in Water: (Weight %) 38% solution @ 20C
Viscosity: Not available.

Normally Stable (Conditions to Avoid): It is stable under normal conditions.
Incompatibles: Oxidizers, e.g. potassium salts -nitrate, nitrite, chlorate, also chlorine or hypochlorite. Strong acids & bases. Avoid contact with zinc-clad and copper.
Hazardous Decomposition Products: Ammonia and sulfur trioxide and sulfur dioxide gases.
Hazardous Polymerization: Will not occur.

Immediate (Acute) Effects:
Acute Oral LD50 Rat: 2840 mg/kg
Acute Inhalation LC50 Rat: > 1000 mg/m³ 8 Hours
Acute Dermal: LD50 dermal rat: 2840 mg/kg (Rat)
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

LC50 Fish-1: 5.2 - 8.2 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [static])
LC 50 Fish-2: 32.2 - 41.9 mg/l (Exposure time: 96 h - Species: Oncorhynchus mykiss [flow-through])
EC50 Daphnia-1: 423 mg/l (Exposure time: 24 h - Species: Daphnia magna)
EC50 Daphnia-2 14 mg/l (Exposure time: 48 h - Species: Daphnia magna)
EC50 Water flea (Ceriodaphnia dubia): 52 - 67 mg/l 48 hours
LC50 Pink salmon (Oncorhynchus gorbuscha): 0.068 mg/l 96 hours
LC50 Rainbow trout, donaldson trout (Oncorhynhus mykiss): 35.2 - 43.8 mg/l 96 Hours
Bioaccumulation: Not expected to bioaccumulate.
Persistence and Degradability: Not likely to persist.
Mobility: Likely to be mobile due to water solubility.

Other Disposal Considerations: The product is a fertilizer; therefore, waste ammonium sulfate might be used as a fertilizer. If discarded to waterways, it may promote eutrophication. Disposal must be in accordance with applicable disposal regulations.

USA Regulations:
California No Significant Risk Level: None of the chemicals in this product are listed.

Disclaimer:
*****************************
Our company provides this Ammonium Sulphate SDS sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Ammonium Sulfate MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
*****************************

Ammonium Sulphate Manufacturers
Ammonium Sulfate Manufacturers:

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Vietnam, Japan, etc.

Ammonium Sulfate SDS of Manufacturers Exporters

Ammonium Sulphate Manufacturers Ammonium Sulfate Manufacturers:

Ammonium Sulphate Manufacturers
Ammonium Sulfate Manufacturers: